Prediction models for the key mechanical properties of EPDM/PP blends as affected by processing parameters and their correlation with stress relaxation and phase morphologies

The optimum condition of processing parameters (mixing temperature, rotor speed, fill factor, and blend ratio) and prediction models for the best key mechanical properties of ethylene propylene diene terpolymer/polypropylene thermoplastic vulcanizates (EPDM/PP TPVs) was investigated by using the Taguchi's optimization technique and data analysis. The results reveal that all of the processing parameters affected significantly the mechanical properties of the EPDM/PP TPVs, but specifically the blend ratio contributed more than 90% in effect size on tensile strength and tension set. There were three main factors, the mixing temperature, the fill factor, and the blend ratio, influencing the elongation at break. Furthermore, the mathematic models were effective and reliable in predicting the properties of TPVs. The correlation of mechanical properties, stress relaxation, and phase morphologies of the TPVs prepared from the predicted models was also investigated. It can be summarized that the morphological structure and stress relaxation of the TPVs were strongly governed by the EPDM content in the blend ratio. That is, the higher the EPDM content, the better phase morphology having smaller size of the vulcanized EPDM particles distributed in the PP matrix and the higher rate of stress relaxation. Moreover, these two properties were then principally pushing the mechanical characteristics of the EPDM/PP TPVs. Copyright © 2015 John Wiley & Sons, Ltd.     

Fully printed flexible audio system on the basis of low‐voltage polymeric organic field effect transistors with three layer dielectric

Fully mass printed, flexible and truly polymeric organic field effect transistors consisting of a three layer dielectric made of CYTOP (low‐k), PVA (intermediate) and P(VDF‐TrFE‐CTFE)(high‐k) are introduced. Gravure‐, flexo‐and screen printing were selected as highly productive manufacturing technologies. These OFETs work at strongly reduced voltages and show high field effect mobility (µ = 0.2 cm²/Vs) and remarkable good bias stress stability at very high current density (50 µA/mm). Fully printed OFETs are used for the realization of ring oscillators working in the kHz regime at reduced supply voltage (10 V). In combination with printed fully polymeric piezoelectric loudspeakers, this work shows for the first time fully printed flexible audio systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1409–1415     

Nanometrization of Lanthanide‐Based Coordination Polymers

Heteronuclear lanthanide‐based coordination polymers are microcrystalline powders, the luminescence properties of which can be precisely tuned by judicious choice of the rare‐earth ions. In this study, we demonstrate that such materials can also be obtained as stable solutions of nanoparticles in non‐toxic polyols. Bulk powders of the formula [Ln_2?2xLn′_2x(bdc)₃ ? 4 H₂O]_∞ (where H₂bdc denotes 1,4‐benzene‐dicarboxylic acid, 0≤x≤1, and Ln and Ln′ denote lanthanide ions of the series La to Tm plus Y) afford nanoparticles that have been characterized by dynamic light‐scattering (DLS) and transmission electron microscopy (TEM) measurements. Their luminescence properties are similar to those of the bulk materials. Stabilities versus time and versus dilution with another solvent have been studied. This study has revealed that it is possible to tune the size of the nanoparticles. This process offers a reliable means of synthesizing suspensions of nanoparticles with tunable luminescence properties and tunable size distributions in a green solvent (glycerol). The process is also extendable to other coordination polymers and other solvents (ethylene glycol, for example). It constitutes a new route for the facile solubilization of lanthanide‐based coordination polymers.     

Two low-cost digital camera-based platforms for quantitative creatinine analysis in urine

In clinical analysis creatinine is a routine biomarker for the assessment of renal and muscular dysfunctions. Although several techniques have been proposed for a fast and accurate quantification of creatinine in human serum or urine, most of them require expensive or complex apparatus, advanced sample preparation or skilled operators. To circumvent these issues, we propose two home-made platforms based on a CD Spectroscope (CDS) and Computer Screen Photo-assisted Technique (CSPT) for the rapid assessment of creatinine level in human urine. Both systems display a linear range (r² = 0.9967 and 0.9972, respectively) from 160 μmol L⁻¹ to 1.6 mmol L⁻¹ for standard creatinine solutions (n = 15) with respective detection limits of 89 μmol L⁻¹ and 111 μmol L⁻¹. Good repeatability was observed for intra-day (1.7–2.9%) and inter-day (3.6–6.5%) measurements evaluated on three consecutive days. The performance of CDS and CSPT was also validated in real human urine samples (n = 26) using capillary electrophoresis data as reference. Corresponding Partial Least-Squares (PLS) regression models provided for mean relative errors below 10% in creatinine quantification.     

Experimental study on the fiber pull-out of composites using digital gradient sensing technique

A method to measure the stress field at the fiber tip in the fiber pull out test was proposed by using a digital gradient sensing technique. First, the principle of digital gradient sensing is introduced, and the non-contact optical system of digital gradient sensing developed. Then, a fiber reinforced composite model specimen, where a nail was inserted in epoxy resin to act as a fiber, was performed, and a pull out test was conducted on the specimen using the digital gradient sensing technique. Finally, the angular deflections contour at the fiber tip was obtained, and the stress intensity factor was extracted from the angular deflections. The results show that the stress intensity factor at the fiber tip extracted from the angular deflections agreed with the results calculated by the finite element method.     

A comparison between parallelization approaches in molecular dynamics simulations on GPUs

We test the relative performances of two different approaches to the computation of forces for molecular dynamics simulations on graphics processing units. A “vertex‐based” approach, where a computing thread is started per particle, is compared to an “edge‐based” approach, where a thread is started per each potentially non‐zero interaction. We find that the former is more efficient for systems with many simple interactions per particle while the latter is more efficient if the system has more complicated interactions or fewer of them. By comparing computation times on more and less recent graphics processing unit technology, we predict that, if the current trend of increasing the number of processing cores—as opposed to their computing power—remains, the “edge‐based” approach will gradually become the most efficient choice in an increasing number of cases. © 2014 Wiley Periodicals, Inc.     

Real‐time electro‐diffusion method to discriminate carbon nanomaterials

We report both the experimental and theoretical insights of differential electro‐diffusion behavior of carbon nanomaterials (e.g. single wall, multiwall carbon nanotubes, and graphene). We thus discriminate one from the other in a soft gel system. The differential mobility of such material depends on their intrinsic properties, both extend and rate of migration bearing the discriminatory signature. The mobility analysis is made by a real time monitoring of the respective bands.     

Silver‐Assisted Chemical Etching on Silicon with Polyvinylpyrrolidone‐Mediated Formation of Silver Dendrites

Metal‐assisted chemical etching (MaCE) on silicon (Si)—mediated by polyvinylpyrrolidone (PVP)—is systematically investigated herein. It is found that the morphologies and crystallographic natures of the grown silver (Ag) dendrites can be significantly modulated, with the presence of PVP in the MaCE process leading to the formation of faceted Ag dendrites preferentially along the (111) crystallographic phase, rather than along the (200) phase. Further explorations of the PVP‐mediated effect on Si etching are also revealed. In contrast to the aligned Si nanowires formed by MaCE without PVP addition, only distributed nanopores with sizes of 200 to 400 nm appear on the Si surfaces in the presence of PVP. The origin of surface polishing on Si in the PVP‐mediated MaCE process can be attributed to the distinct transport pathway of holes supplied by the Ag⁺ ions, where the holes are injected directly into the primary Ag seeds, rather than through Ag dendrites, thus leading to the isotropic etching of the Si surface.     

An emerging strategy for tracing the anti-erectile dysfunction components of raw and salt-processed semens of Astragali Complanati by combinatory liquid chromatography–mass spectrometry-based quantitative analysis,efficacy assessment on impotent rats,and partial least squares regression

Semens of Astragali Complanati own anti-erectile dysfunction effect; however, the components which contribute to the anti-erectile dysfunction effect remain unclear. This work raised a strategy that integrates liquid chromatography coupled mass spectrometry-based quantitative analysis, anti-erectile dysfunction assessment on impotent rats, and their relationship analysis for pinpointing anti-erectile dysfunction components from semens of Astragali Complanati. For simultaneous quantification of seven major components in raw and salt-processed semens of Astragali Complanati, an accurate and reliable liquid chromatography–mass spectrometry method was developed under multiple reaction monitoring mode. Of note, chloramphenicol was employed as the internal standard. The method showed good linearity and repeatability, where the recovery rates of each component ranged from 98.1 to 104.7%, and the precisions of intra- and interday were all within 3.4%. The method has been used for quantification of the seven major components in 10 batches of raw and salt-processed semens of Astragali Complanati. Then, the anti-erectile dysfunction effects of raw and salt-processed semens of Astragali Complanati were evaluated on impotent rats. Gray relationship analysis and partial least squares regression were combined for elucidating the relationship. As a result, complanatuside, astragalin, complanatoside B, and kaempferol were found to be responsible for anti-erectile dysfunction effect of Astragali Complanati.     

A review on key aspects of wet granulation process for continuous pharmaceutical manufacturing of solid dosage oral formulations

Wet granulation process is a major unit operation in production of pharmaceuticals as solid dosage oral formulation. Indeed, granulation is used to improve the formulation properties such as flowability, compressibility, and so on for pharmaceutical manufacturing. Different types of granulations can be used in pharmaceutical manufacturing in which the selection of proper process depends on the operational conditions as well as formulation properties. In current decades, twin-screw wet granulation has been of paramount interest owing to its superior properties. Pharmaceutical manufacturing industry are trying to move towards continuous mode by which the efficiency can be improved compared to the batch mode. Therefore, development of continuous granulation process is of great importance. In this review article, various processing units applicable for wet granulation of pharmaceutical formulations for solid dosage forms are reviewed and discussed. The advantages and disadvantages of the processes are discussed and listed along with modeling approaches for simulation of process. The governing models and numerical schemes applicable for design of wet granulation are also critically discussed. The main focus is on wet granulation as this method has attracted much attention in pharmaceutical processing.